EPEVER Photo voltaic CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is usually a very successful photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) purposes.
Important Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller technologies for excellent photo voltaic Strength harvesting. Critical capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
State-of-the-art MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery everyday living.
Liquid crystal display Display screen with real-time details checking.
Various Load Command Modes together with handbook and timer.
Thorough Electronic Protections against overcharging, around-discharging, shorter circuits, and reverse polarity.
Action-by-Move Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and user manual.
Validate the product variety and voltage rankings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick a perfectly-ventilated, dry location near the battery bank.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always follow good basic safety protocols and ensure the method is run off in advance of connecting parts.
Stage 1: Join the battery terminals to your demand controller (constructive to optimistic, damaging to unfavorable).
Move two: Link the solar panel array to the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity around the controller by connecting the battery to start with.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
5. Checking and Information Logging
The Tracer AN Collection supports serious-time checking using the MT50 remote meter.
Facts could be logged via the RS485 conversation port utilizing software for instance Solar Station Laptop.
Remote checking is achievable with the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Concern one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Around-Voltage Safety
Validate the solar array’s voltage rating.
Modify procedure parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Higher Effectiveness: Reduced Vitality losses during conversion.
Improved Trustworthiness: Stable functionality less than variable loads.
Extended Battery Lifestyle: Regular and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with visit here multiphase synchronous rectification technologies is undoubtedly an Fantastic choice for optimizing solar power generation and lengthening battery daily life. By following the above setup guideline, consumers can be certain most efficiency and technique longevity.