EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Charge Controller is usually a hugely economical solar controller created for off-grid solar methods. Dependant on multiphase synchronous rectification technological know-how, it guarantees optimized Electricity conversion and program security for a wide array of photovoltaic (PV) purposes.
Key Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Solar Charge Controller technological innovation for outstanding photo voltaic Power harvesting. Crucial capabilities involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Improved battery daily life.
Liquid crystal display Exhibit with authentic-time details checking.
Various Load Command Modes such as guide and timer.
Detailed Digital Protections towards overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Step Guide to Putting together the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Assure all factors are integrated: Tracer AN device, temperature sensor, communication cables, and user guide.
Confirm the design variety and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Pick a effectively-ventilated, dry area close to the battery bank.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Warning: Always observe appropriate protection protocols and make sure the program is powered off before connecting factors.
Phase 1: Connect the battery terminals to your cost controller (optimistic to positive, destructive to detrimental).
Action 2: Join the photo voltaic panel array for the PV input terminals.
Action 3: Hook up the load terminals if using a direct load relationship.
Move four: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Settings
Power to the controller by connecting the battery very first.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild Command.
five. Monitoring and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Knowledge may be logged by means of the RS485 communication port using software including Photo voltaic Station Laptop.
Distant checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Issue 1: No Ability Output
Test battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: Around-Voltage Safety
Confirm the photo voltaic array’s voltage rating.
Change program parameters if required.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT options inside the menu.
Great things about the Tracer AN Sequence with MSR Engineering
The multiphase synchronous rectification visit here technology makes certain:
Larger Efficiency: Lessened energy losses in the course of conversion.
Enhanced Dependability: Stable functionality under variable masses.
Lengthier Battery Lifestyle: Steady and accurate charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an exceptional choice for optimizing solar energy era and lengthening battery existence. By following the above mentioned set up manual, end users can assure greatest performance and program longevity.